# Can you enable IPv6 on \*.au.pool.ntp.org please?
**URL:** https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399
**Category:** Uncategorized
**Created:** [September 7, 2019, 8:11pm UTC](https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399 "2019-09-07T20:11:27Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@xrobau](https://community.ntppool.org/u/xrobau)
#### Post date: [September 7, 2019, 8:11pm UTC](https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399/1 "2019-09-07T20:11:27Z")
I’m in the process of creating a bunch of geographically redundant IPv6 Stratum 1 NTP servers and I’m hoping we can flick the switch on enabling AAAA record on all the AU pools (`au.pool` along with 0, 1, and 3).
This will tie into a further chicken-and-egg talk about IPv6 at Linux.conf.au in January, and I’m aiming to have at least 6 100mbit+ Stratum 1 NTP servers in datacenters around AU by then.
Unfortunately, because most people are lazy and just put ‘[au.pool.ntp.org](http://au.pool.ntp.org)’ into their NTP servers, they don’t get AAAA records, so they don’t get IPv6 and it’s a vicious circle of me not being able to show usage, which means people aren’t using it.
---
### Author:  [@imcdona](https://community.ntppool.org/u/imcdona)
#### Post date: [October 10, 2019, 5:15pm UTC](https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399/2 "2019-10-10T17:15:45Z")
This is supposedly being worked on. See this thread: [Intention to enable IPv6 by default in 2017](https://community.ntppool.org/t/intention-to-enable-ipv6-by-default-in-2017/91) and this one: [It's 2019 and still no IPv6 by default?](https://community.ntppool.org/t/its-2019-and-still-no-ipv6-by-default/972)
---
### Author:  [@xrobau](https://community.ntppool.org/u/xrobau)
#### Post date: [October 10, 2019, 8:28pm UTC](https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399/3 "2019-10-10T20:28:02Z")
The code has been written, it’s just not been merged
>
---
### Author:  [@marco.davids](https://community.ntppool.org/u/marco.davids)
#### Post date: [November 22, 2023, 2:08pm UTC](https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399/4 "2023-11-22T14:08:53Z")
> [@xrobau](#):
>
> I’m hoping we can flick the switch on enabling AAAA record on all the AU pools (`au.pool` along with 0, 1, and 3).
Hello @ask! When you do this, can you please do it for NL as well (or perhaps even better: do it for the entire pool at once).
Many thanks!
---
### Author:  [@xrobau](https://community.ntppool.org/u/xrobau)
#### Post date: [November 22, 2023, 8:23pm UTC](https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399/5 "2023-11-22T20:23:28Z")
It appears that this will never happen - my pull request was closed without comment, and … I guess that’s it!
>
>
> I've tried to comment a few times on the forum, but all my posts are getting hel…d up by the spam filter. I thought a better idea would be to just write the code, and THEN argue about it 8)
>
> I should point out this is 100% untested, but hopefully the concept is sound enough to actually get into production, to get the ipv6 data bootstrapped.
>
> You can also wrap that with an if $name == "au", if you're worried about it, as I'm the process of setting up a bunch of ipv6 stratum 1 servers in australia.
---
### Author:  [@Bas](https://community.ntppool.org/u/Bas)
#### Post date: [September 17, 2024, 3:16pm UTC](https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399/6 "2024-09-17T15:16:44Z")
Use this and IPv6 will be served:
```auto
bas@workstation:~$ nslookup 2.pool.ntp.org 1.1.1.1
Server: 1.1.1.1
Address: 1.1.1.1#53
Non-authoritative answer:
Name: 2.pool.ntp.org
Address: 81.82.227.219
Name: 2.pool.ntp.org
Address: 109.68.160.220
Name: 2.pool.ntp.org
Address: 45.87.77.15
Name: 2.pool.ntp.org
Address: 162.159.200.1
Name: 2.pool.ntp.org
Address: 2606:4700:f1::1
Name: 2.pool.ntp.org
Address: 2a0e:f780:0:100::15
Name: 2.pool.ntp.org
Address: 2a0e:f780::3
Name: 2.pool.ntp.org
Address: 2606:4700:f1::123
```
Do not use regional pools, as the pool will autoselect the best servers.
---
### Author:  [@PoolMUC](https://community.ntppool.org/u/PoolMUC)
#### Post date: [September 17, 2024, 3:34pm UTC](https://community.ntppool.org/t/can-you-enable-ipv6-on-au-pool-ntp-org-please/1399/7 "2024-09-17T15:34:42Z")
> [@Bas](#):
>
> the pool will autoselect the best servers
Which, in most cases, will mean the pool will automatically limit you to servers from the country zone that the system believes you are located in.
Exceptions apply if you use privacy-minded DNS resolvers such Cloudflare or Quad9, in which case you will get servers from the country zone the system believes the particular DNS server instance responding to a particular query is located in. Which in most cases likely are servers from your own country zone again, but may occasionally be beyond that.